"Classic" is an aluminum shutter with clean lines and beautifully balanced, ideal for a variety of architectural styles.
Starting from a basic form, several variants were created to meet various aesthetic and functional applications.
"Classic" is an aluminum shutter with clean lines and beautiful balance. Ideal for a variety of architectural styles, it can meet various aesthetic and functional demands. Different versions were created starting from a basic form and using the same frame and sash.
Move – variable position slats
Block – closed fixed slats
Air – open fixed slats
Doga – panel
Izo - insulated panel
“Classic” system dimensions
Frame depth: 49mm
Sash Width x Depth: 45mm x 71mm
Beam width 70mm
Slat width: 66mm
Sill width: 25mm
Panel dimensions (Doga): 120mm x 10mm
This fitting variant uses “flash-base” hinges” for European Chamber rod, for outward opening window. Made in Italy.
Unique design and a high resistance to wear. This system is top range for shutter fittings.
Made in Austria.
This is the most used option. Uses both ranges of hardware components previously shown. One such example uses flash-base hinges and a lock mechanism.
"Scuri" combines safety and tradition successfully. It uses a special sash profile with vertically or horizontally mounted boards. When closed neither light nor air can pass.
"Scuri" combines safety and tradition. It uses a special sash profile with vertically or horizontally mounted boards. When closed neither light nor air can pass.
Availablility: 3 types of panels:
Line - horizontal board
Long - vertical board
Iso – isolated, double board
“Scuri” system dimensions
Frame depth: 49 mm
Sash width x depth: 60 x 71 mm
Beam width (externally visible): 25 mm
Beam width: 70 mm
Sill width: 25mm
Board dimensions: 120 x 10 mm
Izo board: 10 + 20 + 10 mm
This variant uses flash-base hinges for the European Chamber and rod for outward opening window. Made in Italy.
Unique design and a high resistance to wear. This system is top range for shutter fittings.
Made in Austria.
This is the most used option. Uses both ranges of hardware components previously shown. One such example uses flash-base hinges and a lock mechanism.
"Genoveza" shutter is very similar to "Toscana" because both have the bottom part opening outward.
The substantial difference between the two models is that the "Genoveza" additionally has a beam between the fixed half and opening half.
"Genoveza" is a type of shutter very similar to "Toscana" because both have the bottom part opening outward. “Genoveza” has an additional beam between the fixed half and the opening half.
Classic system usable panels: Move, Block, Air, Doga, Izo.
"Genoveza" dimensions
Frame depth: 49mm
Sash Width x Depth: 45mm x 71mm
Sash Width x Depth (Genoveza): 52mm x 71mm
Beam width: 70mm
Slat width: 66mm
Frame sill width: 25mm
Board dimensions (Doga): 120 x 10 mm
This variant uses flash-base hinges for the European Chamber and rod for outward opening window. Made in Italy.
Unique, wear resistant design. This systems is the high end range of shutter fittings.
Made in Austria.
This is the most used option. Uses both ranges of hardware components previously shown. One such example uses flash-base hinges and a lock mechanism.
"Toscana" is a shutter system particularly widespread in the region of the same name in Italy.
It's special feature is the bottom part the can be opened outward to adjust the amount of light and air flow coming in.
"Toscana" is a shutter system particularly widespread in the region of the same name in Italy. It's special feature is the bottom part the can be opened outward to adjust the amount of light and air flow coming in.
Classic system usable panels: Move, Block, Air, Doga, Izo.
"Toscana" dimensions
Frame depth: 49mm
Sash Width x Depth: 45mm x 71mm
Tuscany sash width x depth: 52mm x 71mm
Beam width: 70mm
Slat width: 66mm
Frame sill width: 25mm
Board dimensions (Doga): 120 x 10 mm
This variant uses flash-base hinges for the European Chamber and rod for outward opening window . Made in Italy.
Unique, wear resistant design. This systems is the high end range of shutter fittings.
Made in Austria..
This is the most used option. Uses both ranges of hardware components previously shown. One such example uses flash-base hinges and a lock mechanism.
"Padovana" has 4 separate panels joined in pairs with articulated hinges.
In the open position, end panels rest on the window sill while the mid panels fold at 90° to the facade.
"Padovana" is a shutter consisting of four separate panels joined together in pairs by double-articulated hinges. In the open position, end panels rest on the window sill while the middle panels fold at 90° to the facade.
"Padovana" dimensions
Frame depth: 36 mm
Panel tickness x width: 30mm x 150mm
Unique design and a high resistance to wear. This system is top range for shutter fittings.
Made in Austria.
"Antone" is the aluminum shutters where technology blends with tradition.
Usually done with two wings, it's vertical lines remind of the old wooden shutters.
"Antone" is a shutter where technology blends with tradition. Usually done with two wings, it's vertical lines remind of the old wooden shutters.
"Antone" dimensions
Frame depth: 36 mm
Panel thickness x width: 30mm x 150mm
With a unique design and a high resistance to wear, this system is the top range of fittings for shutters.
Made in Austria.
"Vicentina" is built with four separate wings, joined two by two by a central hinge which enables packaging into the window sill.
Two packing modes: Vicentina and reverse Vicentina.
"Vicentina" is built with four separate wings, joined two by two by a central hinge which enables packaging into the window sill.
Available versions: Vicentina and reverse Vicentina
"Vicentina" dimensions
Frame depth: 36 mm
Panel thickness x width: 30mm x 150mm
With a unique design and a high resistance to wear, this system is the top range of fittings for shutters.
Made in Austria.
The "Sliding" shutter, unlike other types of swing opening shutters, opens by sliding sideways. It glides on rollers, hanging from the top rail. The entire system is encased, completing it's modern design.
Unique design and a high resistance to wear. This system is top range for shutter fittings.
This is the most used option. Uses both ranges of hardware components previously shown. One such example uses flash-base hinges and a lock mechanism.
"Scuri" combines safety and tradition. It uses a special sash profile with vertically or horizontally mounted boards. When closed neither light nor air can pass.
"Genoveza" is a type of shutter very similar to "Toscana" because both have the bottom part opening outward. “Genoveza” has an additional beam between the fixed half and the opening half.
"Toscana" is a shutter system particularly widespread in the region of the same name in Italy. It's special feature is the bottom part the can be opened outward to adjust the amount of light and air flow coming in.
"Padovana" is a shutter consisting of four separate panels joined together in pairs by double-articulated hinges. In the open position, end panels rest on the window sill while the middle panels fold at 90° to the facade.
"Antone" is a shutter where technology blends with tradition. Usually done with two wings, it's vertical lines remind of the old wooden shutters.
"Vicentina" is built with four separate wings, joined two by two by a central hinge which enables packaging into the window sill.
